The Biomedical Engineering Lab was funded in part by a Carol Lavin Bernick faculty grant in 2017. The lab space / maker space is utilized as a collaboration point between the Tulane Simulation Center and the Department of Biomedical Engineering for the testing and development of medical education and healthcare devices. The lab also serves as a space for simulator and equipment maintenance and repair by Sim Center staff.
The Sim Center has two classrooms, which can be used separately or together for one large room. Each room comes with tables, chairs, ceiling-mounted screen and projector and a lectern with AV controls. Connections for the projector are available for both Mac and PC laptops. Both rooms can be set up conference style, classroom style or the tables and chairs can be collapsed against the walls for a clear floor space. Easels with flip charts and white boards are also available in each room. Each classroom has the capacity for 30 learners and the combined rooms can set 60 learners.
The Debrief Room is available for small group meetings before or after training. The room is equipped with a 46-inch flat screen TV that can be connected to a laptop and used for presentations or reviewing training videos. The Debrief Room can accommodate up to 16 people seated at a conference table.
ER / ICU Room.
NOTE: This is NOT the Tulane Hospital Emergency room, this is a simulated training center. If you are having an emergency, dial 9-1-1. If you have a non-emergency, Tulane Hospital can be found at www.tulanehealthcare.com or 504-988-5263. Find a Tulane doctor at 504-988-5800.
The space allows learners to train on assessment and emergency procedures in a 4 bed Emergency Room or can be converted to a 2 bed Intensive Care Unit to practice long-term care techniques. The four-bed room contains two ICU beds and two stretchers, and can be divided into four smaller spaces with curtains. The realistic setting is perfect for team training and is in close proximity to the Labor & Delivery Room, Operating Room, Nurses Station and Hospital Patient Rooms. Any of our patient simulators can be moved into the ER/ICU, and the room is also ideal for emergency task trainers like the TraumaMan System. The ER/ICU can accommodate up to 20 learners at a time.
Full A/V recording is possible from multiple camera angles to allow full assessment and debrief of learning after your simulation session. We also add realism to the scenario by using our P/A system to add typical environmental distraction" that are present in any Emergency Department.
Labor & Deliver / Pediatric Suite.
The L&D Suite / Pediatric Suite allows learners to experience labor and delivery or pediatric procedures in a realistic setting. The room is equipped with a delivery bed for the NOELLE Maternal and Neonatal Birthing Simulator, SimBaby in a hospital crib, and SimNewB in a neonatal warming bed. Additional tables can also accommodate task trainers for skills like episiotomy repair or pediatric airway management. The Labor & Delivery Suite can accommodate up to 20 learners at a time.
Instructors can also observe students from the Control Room through one-way glass. Full A/V recording is also available from multiple cameras to allow full assessment and debrief after your simulation session. A P/A system is also available to provide any desired background distractions.
The Nurses Station is located between the doctor's office clinic exam rooms and hospital patient rooms allowing for realistic team or interprofessional training.
The Operating Room provides learners the opportunity to train in a real-life setting. Equipped with a remote-operated OR table, fully functional GE Healthcare anesthesia machine, anesthesia cart, full range of surgical accessories and OR light. The Operating Room is an ideal setting for team training.
The OR is standardly set up with the CAE Human Patient Simulator (HPS). CAE PediaSim is also available for pediatric scenarios. Any of our patient simulators can be set up in the OR, including the birthing simulator, which allows a C-section to be performed. The OR can accommodate up to 10 learners at a time, although advanced OR simulators are best run with smaller learner groups.
Instructors can also observe and control the simulators from the Control Room through one-way glass. Full A/V recording is also available from multiple cameras and the waveform readouts on patient monitors to allow full assessment and debrief after your simulation session.
Patient Clinic Rooms.
The Sim Center has four doctor's clinic exam rooms to give learners the opportunity to gain experience in patient exam and assessment procedures. Exam rooms can be used with any of our patient simulators or a Standardized Patient. The rooms are also ideal for use with task trainers. The rooms are in close proximity to the Nurses Station, providing an environment ideal for team training. Exam rooms also include full A/V recording from 2 camera angles and a P/A system to help provide extra realism to any training scenario.
Patient Hospital Rooms.
The Sim Center has 3 hospital patient rooms to give learners the opportunity to gain experience providing long-term patient care after procedures in the OR or Labor & Delivery Suite or admittance from the Emergency Department. The rooms all have a patient bed and sitting areas for family members (who can be played by Standardized Patients). Any of the patient simulators can be moved into the hospital rooms for training. The rooms are also in close proximity to the Nurses Station, providing a realistic hospital environment ideal for team training, including Rapid Response Team Training scenarios. Hospital rooms also include full A/V recording capabilities from multiple angles and are part of the Sim Center's P/A system to all the inclusion of environment distractions or pages in any scenario.
The John Winton Deming, MD Suite, Surgical Skills Lab.
The Surgical Skills Lab provides Tulane medical students, residents and healthcare professionals the opportunity to practice specific individual skills. Dozens of task trainers are available in the Skills Lab, from a basic eye exam trainer up to a vascular intervention procedure trainer. The Skills Lab can accommodate up to 15 learners at a time, at various stations, or is available for individual practice sessions.
Available simulators include the 3D Systems GI-Bronch Mentor II endoscopic trainer, 3D Systems U/S Mentor, Mentice VIST (Vascular Intervention Simulation Trainer), Stryker Laparoscopic high-definition trainers, suture pads, lumbar puncture trainer, IV trainers, male and female catheterization trainers, eye exam trainer, ear exam trainer and many more.
Surgical Skills Task Trainers
Ob-Gyn Task Trainers
Airway Management Trainers
Clinical Exam Skills Trainers
Trauma / Emergency Task Trainers
CPR / Resuscitation Trainers
Connect with Tulane Sim Center and stay up on the latest news.